Saturday, 25 March 2017

Week 8 - Catch-up

Catch-up Session

In this week I decided to revisit week 2's brief for the course, focusing on opposites.

I attempted the same setup of fire and ice, so I adjusted the levels of my ice cube drawing to darken lines and remove grey areas.

Added a scenery photo on a layer mask and used a layer modes to overlay the ice cube drawing.

Switching to Illustrator to redraw my fire sketch in more detail.


Last time, the visual fidelity my fire drawing was clearly lacking, as, without any colour and many sketchy lines, the image didn't look like a fire. I edited this in Illustrator and used the image trace tool, retraces the lines using a graphite textured brush, and added warm colours to make the image appear more as a fire rather than a few sketchy lines.

Using the new image crated in Illustrator, I used a light overlay on top of the scenery image, so as to create a non-opaque image which would otherwise be too dominant for the fire and ice theme.

I activated the layer mask for the fire and added an adjustment layer on top of the ice cube layer and changed the hue, contrast and luminosity to achieve a blue colour that can be perceived as ice.


Compared to my previous attempt at creating an an for opposites, this works quite well, as the visual element of fire is prominent but not entirely overwhelming the ice visual element. The layer modes I have used to overlay the images gives a firm concept of opposites - fire and ice. There is some visual tearing in the image because of the level adjusting, which I could have either entirely removed or redrawn as light refraction or shadows acting in relation to the ice cube. The ice cube in question seems slightly flat in hindsight, and adding any form of highlight will have given a better impression of an ice cube.

Tuesday, 21 March 2017

Week 7 - Illustrator

Using Illustrator

In this week we used illustrator to carry out the set brief.

Original scan taken for the work.

With the image applied over a background layer, I used the image trace function to draw the dark regions only, making a solid black image.

Filling in block colours using the brush tools.

Retracing the line work using a 0.25px black brush.

Adding shadows.

Adding further shadow.

Trimming colour leaks outside of the line work.



Using Illustrator to create these types of images is more flexible for me, as I found it easier to manage line work and layers in the work. I particularly think that the colouring using the blob paint tool was effective in making my solid colour images. One thing I can investigate in future work, is experimenting with the other tools, such as the smudge tool, to advance my shading processes and blending tones.

Independent Brief

For the independent part, the task was to use the curvature / pen tool to draw an image.

Using a template, I mapped the figure using the pen tool by setting anchor points, and adjusting the nodes to adjust the lines.

After refining the figure with the pen tool, I used the fill functions and normal colouring processes to fill the image.


I found many difficulties while using the pen tool. Most notably, it was very clunky to figure out the functions and how to edit the anchor points and nodes. I found it useful for creating a uniform path, however, I much prefer using the brush tool as it is much more straight forward. Perhaps using the pen tool on text or shape based figures would be a better use of the tool, which is what I could use the pen tool for in future work.

Tuesday, 14 March 2017

Week 6 - GIFs

GIF Making

In this session we created a moving illustrated GIF with Photoshop using the drawings based on our selected themes.



I scanned in the image I was using for the GIF.


I used the selection tool to extract rough positions of the lightning bolts for each keyframe.


To fill the cloud, I scanned in my own fur hoodie as a texture.


Set the threshold to remove mid-tones, so the cloud blends better with the line.


Using the storyboard frames, I used the magic wand tool to roughly select an irregular area to fill for the lightning portion of the GIF.


I changed the surrounding colours, and the cloud colour during frames with lightning.


Using the timeline, I adjusted the compiled layer timings to finalise the GIF.



The GIF I have created shows some form of dynamic movement by using different shaped lightning bolts on different frames accompanied by a darkened background, which I think is very effective. Something that I can consider is moving the cloud it self rather than leaving it static, so the GIF would be constantly moving, but also show greater movements on keyframes with lightning.

Monday, 6 March 2017

Week 5 - Textures

Textures

For this week, prior to the session we drew images associated with food, transport, sports and nature. I scanned these in the session to create patterns which could then be used with the bucket fill tool.

PART 1
I adjusted the levels of the image to remove most of the white area and darken the lines.

Because of how messy the pencil work was I decided to retrace the image and fill with colour using the brush tool. After, I replicated the image and transformed it to make a pattern.

Final result after defining the pattern and using the fill tool.

Second pattern using the same process.

In the third pattern, I offset the image after expanding the canvas with a leftmost anchor. I pasted the original image on the right side to create the final pattern.

Final pattern using the offset method, after compiling an image using scans and custom brushes.





I think the patterns worked well, and I particularly like how my offset pattern has turned out. I could try experimenting with mirroring my patterns or blending parts of another image to make a more interesting pattern, which is something I did not do with my own images as I only produced repeated and offset patterns.

PART 2

The task was to use the patterns from Part 1 to fill an object or character.


Scanned in, and made only the black channel of the football visible, and pasted onto a new layer.


Using the magic wand tool, I made a multi-selection of the wanted regions for filling using Command+Shift keybind (Control+Shift on Windows), and filled the selected area with one pattern.


On a layer, I used a different pattern, and deleted a few regions in which the pattern appears.



My work in this exercise is simple, being a very small figure, but I now understand the steps to creating textures and selecting fill areas. I had transformed the image to make it bigger, but perhaps drawing and entirely new figure, or picking a stock image from the resource folder would have increased the volume of the artwork, as in my opinion, it currently seems very small to look at, and in some ways rather crudely done. Another option would have been to retrace the image as a larger object and use a combination of custom and preset patterns to fill the black and white polygons on the football.

Saturday, 4 March 2017

Week 4 - Drawing with Photoshop

Drawing with Photoshop

In preparation to the session, we took many photos of walls, buildings and architecture. We used, these to create digital images by using the brush tools and textures, and to create sketchbook drawings.

I scanned in the drawings from the walk around Worcester and used these as a basis for drawing images using the brush tool.

PART 1
Using levels to eliminate grey lines.

Using the channels, I displayed black colour channel only and used the magic wand to select.

Establishing a colour palette on a separate layer.

I filled in solid colours using the brush tool and preset round brush.

 
I finalised the image by adding mid-tones, darker tones and highlights to the image on different layers, and adding faded texture using pressure sensitivity and custom brushes from week 3. Using a layer mask over a layer set prevented unnecessary paint coverage.


I think the final image works very well, and I particularly think the brush work and selection of colours is very effective in showing a visual of the building. What I can try doing to improve on the work is using my custom brushes more to show textures on the walls and the roof of the building to remove the flatness of the drawing created by the solid colours. Using pressure scaling for brush density may also have helped to shading in the mid-tones of the building also, which should have been done on different layers.

PART 2

For this part of the session, I reduced the transparency of the photograph before working onto the image using the brush pen.


I selected a dark tone to colour in corresponding dark regions of the image. For the entirety of the session I only focused on drawing the foreground - the gate.


On another layer I selected a lighter colour by shifting the hue, increasing the luminosity and decreasing the contrast of the colour to fill in the mid-tones of the gate.


On the final layer I chose another lighter colour to fill in highlights. I decided to leave the colours solid instead of blending together colours.



The tonal aspect of the this image works well as I think the colours I have chosen display the tone of the gate effectively. Though the final shape of the image is a bit jagged so smoothing the lines of the image, maybe by using another layer and applying straight lines to the drawing may tidy up the figure. Merging the colour layers and blending the colours (using the smudge tool, for example), or filling in more defined mid-tones could have helped in improving the visual shape of the image.